Wipe sissor oil over the blades and pop them in an airtight container, you can wrap them in paper towel or fabric too if you wanted.
I usually oil my inexpensive pair of scissors. Recently I bought a pair of washi scissors and I am very worried they are going to rust without oil on the blade in the humidity. I once had a pair of sewing scissors rust on me in their sheath. What should i do?
2a M iii - ?? inches - Finger tip length
Wipe sissor oil over the blades and pop them in an airtight container, you can wrap them in paper towel or fabric too if you wanted.
Pixie *SL * APL * BSL * WL * HL * Curly Waist
SL Dec '13, APL Mar '15, bsl Dec '15, WL Dec '16, HL Dec '17, TBL Dec '18, CL Dec'19
You can also find "damp rid" packets to store along with them. To absorb the moisture.
Silica packets.
http://www.amazon.com/gp/aw/d/B00DYK...sture+absorber
Last edited by Wildcat Diva; June 5th, 2016 at 08:00 AM.
Yes i wanted to recommend the moisture absorbing packs too. I'd just keep them in a tupper box wrapped in a piece of cloth and throw in a few of these packs.
Agree with the above. Oil them regularly, stuck them in a plastic container with some of those damp-eliminating packets, even leftover ones from products you bought.
Come to think of it, maybe I shouldn't keep mine in the bathroom.
ETA: I think good blades are frequently made of a carbon steel that is more prone to rust. Ability to keep an edge and to avoid rust seem to often be opposite qualities.
Last edited by Anje; June 5th, 2016 at 10:43 AM.
Mine are 440C steel witch is very rust resistant. I just don't want to chance it. Thanks guys will def do all if this. I pretty much have to live with tones of damp rid at all times.
2a M iii - ?? inches - Finger tip length
Stainless steel can infact corrode. This happened to my stainless steel kitchen sink and the counter around it, after I had used very liberally baking soda to scrub it and hadn't rinsed it off well. Everything was full of rust speckles. Thankfully with scrubbing with steel wool (I think it's called) the stainless steel cleaned up well and the rust hasn't come back. I had been really worried I'd need to replace the sink/counter combo. I'm not going to use baking soda on SS again.
Before this I wouldn't have believed stainless steel could corrode. Granted it didn't rust from water exposure.
After that incident I saw how a wet stainless steel surface got corroded from putting an iron pot on it, where the steel touched the iron of the pot.
Last edited by Arctic; June 6th, 2016 at 02:20 PM.
Always behave like a duck -
keep calm and unruffled on the surface but paddle like the devil underneath.
Bookmarks