Printable View
2022
04/29 (joined LHC) 44"
05/07 trimmed .25"
06/09 trimmed .25"
06/30 44.5"
07/10 trimmed .25"
07/30 45"
08/10 trimmed .25"
08/31 45.5"
09/18 trimmed .25"
09/30 45.5"
10/08 trimmed .25"
10/31 46"
12/02 trimmed .50"
12/02 46" after trim
12/31 trimmed .25"
12/31 46.25" after trim
Trimmed a total of 2.25" in 9 months using Feye's Method for straight across[b]
2023
01/31 trimmed .25" Measured 46.75" after trim
6/20 27 1/2” trimmed to deepen ‘u’ and measured the same after
7/20 28”
8/20 28 1/4” dusting trim & measured the same after
9/20 28 3/4” compact cut 1” and Feye’s trimmed 1/2”
28 1/4” after trim
10/20 28 1/2” dusting trim ponytail method & measured same after
11/12 28 1/2”
12/18 29” trimmed 1/2” using Feye’s Method for deep ‘U’ & 2” ponytail cut from crown
28 1/2” after trim
1/15 29 1/4”
2/15 29 1/4” trimmed a handful of racers, less than 1/4” removed
2022
04/29 (joined LHC) 44"
05/07 trimmed .25"
06/09 trimmed .25"
06/30 44.5"
07/10 trimmed .25"
07/30 45"
08/10 trimmed .25"
08/31 45.5"
09/18 trimmed .25"
09/30 45.5"
10/08 trimmed .25"
10/31 46"
12/02 trimmed .50"
12/02 46" after trim
12/31 trimmed .25"
12/31 46.25" after trim
Trimmed a total of 2.25" in 9 months using Feye's Method for straight across[b]
2023
01/31 trimmed .25" Measured 46.75" after trim
02/28 trimmed .25" Measured 47" after trim
I trimmed off 0.75" tonight, only about 10 hairs :rollin: But with that, my hemline thickness has effectively doubled!
My February measurement was approximately 73.5", so I should be somewhere around 73" now. That's technically still an inch beyond floor, but it doesn't feel like it thanks to Flippy Ends™. I feel like I need the extra length to make up for that, so I'll probably end up maintaining floor here.
6/20 27 1/2” trimmed to deepen ‘u’ and measured the same after
7/20 28”
8/20 28 1/4” dusting trim & measured the same after
9/20 28 3/4” compact cut 1” and Feye’s trimmed 1/2”
28 1/4” after trim
10/20 28 1/2” dusting trim ponytail method & measured same after
11/12 28 1/2”
12/18 29” trimmed 1/2” using Feye’s Method for deep ‘U’ & 2” ponytail cut from crown
28 1/2” after trim
1/15 29 1/4”
2/15 29 1/4” trimmed a handful of racers, less than 1/4” removed
3/14 29 1/2”
3/15 28 3/4” trimmed Feye’s Method, approximated 1”- apparently it was 3/4” :wink:
(Also reshaped face framing layers to angle into top of U shape)
Edited to include my trim today!
45 1/4" on March 20th, trimmed a little over an inch 1" now at 44".
2022
04/29 (joined LHC) 44"
05/07 trimmed .25"
06/09 trimmed .25"
06/30 44.5"
07/10 trimmed .25"
07/30 45"
08/10 trimmed .25"
08/31 45.5"
09/18 trimmed .25"
09/30 45.5"
10/08 trimmed .25"
10/31 46"
12/02 trimmed .50"
12/02 46" after trim
12/31 trimmed .25"
12/31 46.25" after trim
Trimmed a total of 2.25" in 9 months using Feye's Method for straight across[b]
2023
01/31 trimmed .25" Measured 46.75" after trim
02/28 trimmed .25" Measured 47" after trim
03/31 trimmed .25" Measured ~47.25" after trim
I'll start to measure my hair to see does it grow or not. I apologize for metric system.
1st May: 67 cm
6/20 27 1/2” trimmed to deepen ‘u’ and measured the same after
7/20 28”
8/20 28 1/4” dusting trim & measured the same after
9/20 28 3/4” compact cut 1” and Feye’s trimmed 1/2”
28 1/4” after trim
10/20 28 1/2” dusting trim ponytail method & measured same after
11/12 28 1/2”
12/18 29” trimmed 1/2” using Feye’s Method for deep ‘U’ & 2” ponytail cut from crown
28 1/2” after trim
1/15 29 1/4”
2/15 29 1/4” trimmed a handful of racers, less than 1/4” removed
3/14 29 1/2”
3/15 28 3/4” trimmed Feye’s Method, approximated 1”- apparently it was 3/4”
(Also reshaped face framing layers to angle into top of U shape)
4/16 29”
Trimmed about 0.5" off tonight and measured in at 73" (as accurately as I can measure on my own). My hemline is slowly getting more symmetrical :)